Tips For Troubleshooting Your Home Alarm System In Huntsville
System malfunctions and false alarms can be aggravating, and even more concerning, might prevent your home’s security from doing its job effectively. Luckily, most problems, from dead batteries to false alarms, are straightforward to remedy. Check out our suggestions for troubleshooting your home alarm system in Huntsville. We’ll help you keep your household safe and your system running the way it should.
Test Your Home Security System In Huntsville
One great way to troubleshoot your home’s security is to test it! Newer systems let you put them in test mode to avoid prompting an emergency call. Once you’re in test mode, follow these steps:
- Activate your system as you normally would when leaving.
- Open a window or door that uses a contact sensor, or test other equipment. Close the window or door once you’re finished so it doesn’t trip the alarm as you reactivate the system.
- Permit the alarm to sound for 60 seconds to ensure communications with the security company and to produce an entry in the alarm system log.
- Continue testing equipment as you wish
- Check the system activity log to verify that everything’s working.
No need to worry, monitoring specialists can tell that your alarm system is undergoing a test. Just make sure to switch out of test mode when complete. It’s a good idea to test once a month or anytime you change your home’s phone or internet service.
Inspect The Positioning And State Of Motion Detectors
Although an crucial aspect of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.
- Conduct a visual inspection. Is there anything that could shift within the detection path of the sensor, like drapery blown in a breeze?
- Is the sensor clean? Grime, dirt, and cobwebs can result in issues. Make sure the face is clean.
- Does the motion detector come with pet immunity you can turn on? Some sensors can be configured to disregard pets weighing up to 100 pounds.
- When was the battery last replaced? Low batteries may impact performance or lead to false alarms.
- Is a heat source impairing the sensor? Excess heat from a fireplace, direct sun, or something else can cause an alarm.
Keep Batteries Ready And Pay Attention To Low Battery Signals
One of the great things about new home security systems is that they’ll notify you when batteries are getting low. If your system is equipped with a control panel or smartphone app, you’ll typically find alerts there. Depending on your system, you might detect an occasional beep when batteries are low.
Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that will have to be replaced every 1 to 2 years. It’s a good idea to keep batteries around and create a replacement schedule. Top systems also have a rechargeable backup battery for the central control panel. This backup battery keeps your system operating if you lose power and should recharge itself once power is back online. If it doesn’t, you will need to replace it.
Troubleshooting Is Effortless With ADT Home Security In Huntsville
As the top name in home security, ADT creates systems that supply unsurpassed protection and functionality. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get updates when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Huntsville home. Dial (256) 240-0573 or fill out our form today!